Mercedes-Benzof Ft. Pierce

How much does it cost to get the engine light checked?

The average cost for a check engine light diagnosis & testing is continually between $88 and $111. The good news, Mercedes-Benz of Fort Pierce offers complimentary multi-point inspections and free diagnostics, in most cases, to help elect for the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more perilous failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it good to get the fair code reading and diagnosis.

2014 Mercedes-Benz ML 350 Check Engine Light

If the check engine light in your 2014 Mercedes-Benz ML 350 starts flashing, that means that the problem needs hasty attention and your Mercedes-Benz should be delivered in immediately. A flashing light indicates that the problem is precarious and if not taken care of immediately may result in major wear and tear to the vehicle. This glaring light usually indicates a dangerous engine misfire allowing unburned fuel to be discarded into the exhaust system. There it can rapidly raise the temperature of the catalytic converter to a point where damage is potential, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can really be the cause. A bad, departed or dirty spark plug can cause the engine to misfire. If your check engine light is flashing, please contact our team of automotive experts at Mercedes-Benz of Fort Pierce quickly by calling 7725772694. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a incredibly expensive repair.

Will the check engine light reset itself?

The check engine light on your 2014 Mercedes-Benz ML 350 will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going fair, and you did assorted of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2014 Mercedes-Benz ML 350 light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Mercedes-Benz of Fort Pierce so the light and code can be double-checked and reset.

2014 Mercedes-Benz ML 350 Check Engine Light Flashing

Although there are countless likely causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are tremendous acknowledged causes including something as visible as a loose gas cap. Additional acknowledged reasons for a Check Engine Light are damaged oxygen sensor, faulty emissions control part, faulty head gasket, dirty mass airflow sensor, a malfunction with the fuel injection system, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Mercedes-Benz Certified Technicians and the certified service protocol to isolate the root problem and repair it as necessary to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Mercedes-Benz issue was fixed.

Every 2014 Mercedes-Benz ML 350 was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its hard systems. The sensors are continually detecting conditions while sending data to the computerized control unit. If the computerized control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is wrong nor what to do about it. That’s where we come in; Mercedes-Benz of Fort Pierce provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Extremely Qualified Service professional.

What Does the Check Engine Light Mean?

One of the most commonly misunderstood lights or indicators in your 2014 Mercedes-Benz ML 350 is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few distinctive ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2014 Mercedes-Benz ML 350. Some of these include shifting automatic transmissions controlling engine speed, ignition timing, and implementing stability control, just to name various. With that being said, the check engine light can indicate a variety of added things. It can be as effortless as your gas cap being loose or as strict as engine knocking. If your check engine light is on in your 2014 Mercedes-Benz ML 350, contact Mercedes-Benz of Fort Pierce. Contact Mercedes-Benz of Fort Pierce today! Our Mercedes-Benz service department can help you learn what code is turning your check engine light on or investigate why your check engine light is shining.

Is it safe to drive your 2014 Mercedes-Benz ML 350 with the check engine light on?

This question is not notably uncomplicated because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is mostly indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more atrocious problem. If the check engine light is glaring, this means that there is a atrocious issue and it is recommended to service your Mercedes-Benz ML 350 shortly. Call the experts at Mercedes-Benz of Fort Pierce by dialing 7725772694 so you can describe the issues. Or reduce your speed and bring your 2014 Mercedes-Benz to our certified mechanics as soon as accessible.

2014 Mercedes-Benz ML 350 Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear proper away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your ML 350. There are hundreds of divergent codes that your check engine light can represent. While that sounds daunting, with a little patience, tackling decisive diagnostics will give you agreeable knowledge about your car and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, curious and agreeable car symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of possible OBD codes, there are also hundreds of possible reasons for the light, including:

• Fuel and air metering systems problems
• Old Battery
• Ignition system faults
• Bad Spark Plugs
• Loose Gas Cap or Missing Gas Cap
• Emissions controls issues
• Transmission issues
• Computer output circuit issues
• O2 Sensor

This is why it is primary for someone who does not have a lot of automotive knowledge to not assume what a code means. If the engine light comes on due to a perilous concern, you risk damaging your car contrasting by not repairing the issue decent away. When your check engine light comes on, you should get it checked out rapidly by a certified Mercedes-Benz mechanic. Call Mercedes-Benz of Fort Pierce at 7725772694 today or schedule your check engine light service online today!

Check Engine Light Service 2014 Mercedes-Benz ML 350

What do you do when you’re driving along in your Mercedes-Benz ML 350 and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Mercedes-Benz owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t find out you have to pull the automobile over to the side of the road and call a tow truck, but it is recommended that you get your 2014 Mercedes-Benz ML 350 checked as soon as possible. Ignoring that warning could end up causing major damage to expensive engine components.

When your 2014 Mercedes-Benz ML 350's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electrical control system that it can’t good, a computer turns on your check engine light. This amber or yellow light is commonly labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an technical diagnose tool that is used by our Mercedes-Benz auto repair mechanics at Mercedes-Benz of Fort Pierce. There are also a number of relatively low-priced code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced professional to determine the issue and repair it.

How many miles can you drive with the check engine light?

Since each check engine code has its own level of severity, it is difficult to predict how many miles you can drive with the warning light on. The safest bet is to decipher the code and then plan your strategy accordingly. It could be anything from a bad sensor to plug wires needing to be replaced. If you check engine light is flashing, we recommend that you pull over and contact Mercedes-Benz of Fort Pierce to help imply if your vehicle is secure to drive in or if we recommend a tow truck.

What could cause the check engine light to come on in a 2014 Mercedes-Benz ML 350?

When your check engine light comes on, this could be as apparent as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a impressive problem that could cause impressive damage to your engine and come with a big repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow naturally means something less impressive but a flashing check engine light illustrates that your vehicle’s engine is in impressive trouble and service is necessary immediately. If your check engine light is flashing in your 2014 Mercedes-Benz ML 350, we highly endorse not to travel to work the automobile and schedule Mercedes-Benz service today. Below is a list of the most prevailing reasons your check engine light can come on:

• Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, typical as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less active when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2014 Mercedes-Benz ML 350's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to learn the honorable mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
• Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2014 Mercedes-Benz ML 350’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is customarily caused by neglected maintenance, which is why Mercedes-Benz of Fort Pierce offers a complimentary multi-point inspection with every Mercedes-Benz service. If you have an issue with your catalytic converter and don't get it revamped, your 2014 Mercedes-Benz ML 350 will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause discrete problems from overheating.
• New Spark Plugs or Plug Wires are decisive for your 2014 Mercedes-Benz ML 350. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires bring the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or old, you will experience small performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, large to more expensive repairs.
• Issues with any aftermarket items. An aftermarket alarm, exhaust or discrete item can wreak havoc on your 2014 Mercedes-Benz ML 350 if it’s not installed perfectly. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound typical, bring your ML 350 to Mercedes-Benz and have our team of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, extremely aftermarket parts and accessories, or using OEM parts first place might cost a little bit more but could save you money from having to get small work and damage caused by small installation work corrected.
• One of the most respectable and copious cause is that your 2014 Mercedes-Benz ML 350 gas cap is loose, damaged or missing. The gas cap for your 2014 Mercedes-Benz ML 350 serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on urgently after you put gas in your 2014 Mercedes-Benz ML 350, first thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
• The battery is low or dead. The battery in your 2014 Mercedes-Benz ML 350 is every compelling. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a lot decades ago, and they don't certainly require maintenance. The price of a new one depends on the type of Mercedes-Benz you drive, but check our current service coupons and specials.
• Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Mercedes-Benz ML 350 is what determines how much fuel is decisive to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to actual changes, like altitude. If your Mercedes-Benz ML 350 is having trouble starting, idling rough or has a hasty change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
• Your 2014 Mercedes-Benz ML 350 has a vacuum leak. Every Mercedes-Benz ML 350 has a vacuum system that performs a wide mixture of functions. The vacuum system also helps deduction harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, extremely if they’re exposed to persuasive heat or extreme chilled.