Please wait while the page loads...

2016 Mercedes-Benz ML 350 Check Engine Light Flashing

Although there are copious capacity causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are several prevalent causes including something as commonplace as a loose gas cap. Supplemental prevalent reasons for a Check Engine Light are faulty emissions control part, damaged oxygen sensor, a malfunction with the fuel injection system, dirty mass airflow sensor, faulty head gasket, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Mercedes-Benz Certified Technicians and the certified service protocol to isolate the root problem and repair it as decisive to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Mercedes-Benz issue was fixed.

Every 2016 Mercedes-Benz ML 350 was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its crucial systems. The sensors are frequently detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what specifically is wrong nor what to do about it. That’s where we come in; Mercedes-Benz of Fort Pierce provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Extraordinarily Qualified Service skilled.

How much does it cost to get the engine light checked?

The average cost for a check engine light diagnosis & testing is frequently between $88 and $111. The satisfying news, Mercedes-Benz of Fort Pierce offers complimentary multi-point inspections and free diagnostics, in most cases, to help hint the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more energetic failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it satisfying to get the detectable code reading and diagnosis.

What Does the Check Engine Light Mean?

One of the most frequently misunderstood lights or indicators in your 2016 Mercedes-Benz ML 350 is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few contrasting ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a collection of things for your 2016 Mercedes-Benz ML 350. Some of these include controlling engine speed, ignition timing, shifting automatic transmissions and implementing stability control, just to name a few. With that being said, the check engine light can recommend a collection of assorted things. It can be as pure as your gas cap being loose or as unhealthy as engine knocking. If your check engine light is on in your 2016 Mercedes-Benz ML 350, contact Mercedes-Benz of Fort Pierce. Our Mercedes-Benz service department can help you find out what code is turning your check engine light on or diagnose why your check engine light is flashing. Contact Mercedes-Benz of Fort Pierce today!

How many miles can you drive with the check engine light?

If you check engine light is twinkling, we recommend that you pull over and contact Mercedes-Benz of Fort Pierce to help opt for if your vehicle is strong to drive in or if we recommend a tow truck. It could be anything from a bad sensor to plug wires needing to be changed. Since each check engine code has its own level of severity, it is laborious to predict how frequent miles you can drive with the warning light on. The safest bet is to decipher the code and then plan your strategy properly.

What could cause the check engine light to come on in a 2016 Mercedes-Benz ML 350?

When your check engine light comes on, this could be as classic as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a unhealthy problem that could cause unhealthy damage to your engine and come with a substantial repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow naturally means something less unhealthy but a flashing check engine light indicates that your vehicle’s engine is in unhealthy trouble and service is needed suddenly. If your check engine light is flashing in your 2016 Mercedes-Benz ML 350, we largely recommend not to drive the vehicle and schedule Mercedes-Benz service today. Below is a list of the most routine reasons your check engine light can come on:

  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2016 Mercedes-Benz ML 350’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Mercedes-Benz of Fort Pierce offers a complimentary multi-point inspection with every Mercedes-Benz service. If you have an issue with your catalytic converter and don't get it repaired, your 2016 Mercedes-Benz ML 350 will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause additional problems from overheating.
  • The battery is low or dead. The battery in your 2016 Mercedes-Benz ML 350 is every substantial. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't explicitly require maintenance. The price of a new one depends on the type of Mercedes-Benz you commute, but check our present service coupons and specials.
  • Your O2 Sensor (Oxygen Sensor) needs to be replenished. The Oxygen sensor, known as the O2 sensor, measures the payment of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your car will be less competent when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2016 Mercedes-Benz ML 350's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to read the honest mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
  • Your 2016 Mercedes-Benz ML 350 has a vacuum leak. Every Mercedes-Benz ML 350 has a vacuum system that performs a wide variety of functions. The vacuum system also helps reduce down harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can bare out and crack, exceptionally if they’re exposed to climactic heat or extreme precipitous.
  • One of the most common and copious cause is that your 2016 Mercedes-Benz ML 350 gas cap is loose, damaged or missing. The gas cap for your 2016 Mercedes-Benz ML 350 serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is classic or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on immediately after you put gas in your 2016 Mercedes-Benz ML 350, first thing you should check is to make positive the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your mass airflow sensor (known as MAF) needs to be replenished. The mass airflow sensor in your Mercedes-Benz ML 350 is what determines how much fuel is fundamental to run your engine efficiently by measuring the payment of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to aware changes, like altitude. If your Mercedes-Benz ML 350 is having trouble starting, idling rough or has a quick change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or additional item can wreak havoc on your 2016 Mercedes-Benz ML 350 if it’s not installed appropriately. These aftermarket parts and accessories can discard the battery, trigger the check engine light, or even stop the car from starting. If these issues sound commonplace, bring your ML 350 to Mercedes-Benz and have our team of certified mechanics ensure that your aftermarket items were installed well and aren't causing any issue. Getting accessories, exceptionally aftermarket parts and accessories, or using OEM parts first place might cost a tiny bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • New Spark Plugs or Plug Wires are fundamental for your 2016 Mercedes-Benz ML 350. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your car. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or classic, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, considerable to more expensive repairs.

Will the check engine light reset itself?

The check engine light on your 2016 Mercedes-Benz ML 350 will commonly shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going functional, and you did a few of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2016 Mercedes-Benz ML 350 light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Mercedes-Benz of Fort Pierce so the light and code can be double-checked and reset.

2016 Mercedes-Benz ML 350 Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear polite away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also pure as the OBD (on-board computer diagnostic system) in your ML 350. There are hundreds of distinct codes that your check engine light can represent. While that sounds daunting, with a little patience, tackling paramount diagnostics will give you appropriate knowledge about your vehicle and will also allow that Check Engine Light to do what it is certainly supposed to do: be your guide. Unfortunately, good and good vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of likely OBD codes, there are also hundreds of likely reasons for the light, including:

  • Old Battery
  • Ignition system faults
  • Transmission issues
  • Bad Spark Plugs
  • Fuel and air metering systems problems
  • Loose Gas Cap or Missing Gas Cap
  • Emissions controls issues
  • Computer output circuit issues
  • O2 Sensor

This is why it is awesome for someone who does not have a lot of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out immediately by a certified Mercedes-Benz mechanic. Call Mercedes-Benz of Fort Pierce at 7725772694 at this moment or schedule your check engine light service online today! If the engine light comes on due to a precarious concern, you risk detrimental your car further by not repairing the issue correct away.

Is it safe to drive your 2016 Mercedes-Benz ML 350 with the check engine light on?

This question is not very simple because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is normally indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more risky problem. If the check engine light is flashing, this means that there is a risky issue and it is recommended to service your Mercedes-Benz ML 350 instantly. Call the experts at Mercedes-Benz of Fort Pierce by dialing 7725772694 so you can describe the issues. Or reduce your speed and transport your 2016 Mercedes-Benz to our certified mechanics as soon as conceivable.

2016 Mercedes-Benz ML 350 Check Engine Light

A twinkling light indicates that the problem is important and if not taken care of shortly may result in broad damage to the vehicle. If the check engine light in your 2016 Mercedes-Benz ML 350 starts twinkling, that means that the problem needs prompt attention and your Mercedes-Benz should be brought in shortly. This blinking light usually indicates a rigorous engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can rapidly enhance the temperature of the catalytic converter to a point where wear and tear is convenient, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can exactly be the cause. A bad, erstwhile or dirty spark plug can cause the engine to misfire. If your check engine light is glaring, please contact our department of automotive advisors at Mercedes-Benz of Fort Pierce instantly by calling 7725772694. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a chiefly expensive repair.

Check Engine Light Service 2016 Mercedes-Benz ML 350

What do you do when you’re driving along in your Mercedes-Benz ML 350 and suddenly, a yellow light lights up on your dash and says "Check Engine". If you’re like most Mercedes-Benz owners, your heart sinks a miniature because you have miniature idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2016 Mercedes-Benz ML 350 checked as soon as possible. Ignoring that warning could end up causing big damage to expensive engine components.

When your 2016 Mercedes-Benz ML 350's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t available, a computer turns on your check engine light. This amber or yellow light is normally labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is find out with an computerized scan tool that is used by our Mercedes-Benz auto repair mechanics at Mercedes-Benz of Fort Pierce. There are also a number of relatively inexpensive code readers that are designed for do-it-yourselfers, should you select that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced technological to determine the issue and repair it.